A: If we have stock, MOQ 3000pcs. | B: If out of stock, MOQ is 10000pcs.
Views: 0 Author: Site Editor Publish Time: 2026-09-15 Origin: Site
The Hydrating face cream jar is designed for water-rich gels, lotions, and serums with viscosities from 2,000 to 15,000 centipoise. These formulas often contain hyaluronic acid, glycerin, panthenol, and botanical extracts. They can lose water over time, and they can leave residue on jar walls. A Hydrating face cream jar should reduce product waste, maintain moisture, and support hygienic use. At Guangzhou Ruijia Packaging Products Co.,Ltd, we produce Hydrating face cream jar systems with optimized internal geometry, compatible liners, and optional pump integration. This article covers design, materials, testing, and technical details. It also refers to the Moisturizing cream jar, Double wall cosmetic jar, Frosted moisturizer jar, and Acrylic cream jar.
A Hydrating face cream jar holds a formula with high water content. The viscosity is lower than a rich cream. The product may flow slowly and cling to walls. The jar should have a tapered inner wall to reduce adherence. A rounded bottom corner can help the product gather toward the center. A wide mouth can allow a spatula or fingers to reach the product. A pump can provide a metered dose and reduce contamination.
A Moisturizing cream jar is better for thicker butters. A Hydrating face cream jar is better for lighter gels. A Double wall cosmetic jar can protect heat-sensitive actives. A Frosted moisturizer jar can provide a matte look. An Acrylic cream jar can provide high clarity.
The main materials for a Hydrating face cream jar are PETG, acrylic, SAN, and polypropylene. PETG offers clarity and impact resistance. Acrylic offers high gloss and stiffness. SAN offers a balance of clarity and cost. Polypropylene offers chemical resistance and low weight.
Material | Clarity | Impact | Water Barrier | Cost | Notes |
|---|---|---|---|---|---|
PETG | High | High | Medium | Medium | Good for clear jars |
Acrylic | High | Medium | Medium | Medium | Good for gloss |
SAN | Medium | Medium | Medium | Low | Good for thick walls |
Polypropylene | Low | High | High | Low | Good for opaque jars |
Glass | High | Low | High | High | Good for inert contact |
The internal shape of a Hydrating face cream jar affects how much product remains. A straight wall with a flat bottom can leave 2.0 g to 2.6 g in a 50 ml jar. A tapered wall with a 2-degree draft and a 3 mm bottom radius can reduce this to 1.5 g to 1.8 g. A sloped bottom can reduce it further to about 1.0 g. The jar mouth should be wide enough for easy access. A 53 mm neck is common for 50 ml. A 63 mm neck is common for 100 ml.
A pump can be added to a Hydrating face cream jar. The pump should reach the bottom of the jar. A dip tube with a small inner diameter can draw low-viscosity product. The pump dose should be set to 0.3 ml to 0.5 ml. A pump can reduce air contact and improve hygiene. A Moisturizing cream jar may not need a pump because the product is thick. A Double wall cosmetic jar may use a pump with a special neck. A Frosted moisturizer jar may use a pump with a matte finish. An Acrylic cream jar may use a pump with a clear body.
The liner of a Hydrating face cream jar must resist water and preservatives. A foam liner with a polyethylene film can provide a good seal. A foil liner can provide a strong moisture barrier. A fluoropolymer-coated liner can reduce product wicking. The cap should match the neck finish. A multi-start thread can reduce opening effort.
We test the seal by filling the jar and storing it at 40°C and 75% relative humidity. We measure weight loss and inspect for leakage. A Hydrating face cream jar should lose less than 0.5% weight over 12 weeks. A Moisturizing cream jar may have a different target because the formula has less water. A Double wall cosmetic jar may have an air gap that affects heat transfer. A Frosted moisturizer jar may have a rougher sealing surface. An Acrylic cream jar may have a smoother sealing surface.
A Hydrating face cream jar can be decorated with silk screen printing, hot stamping, or labels. A clear jar can show the product color. A frosted jar can provide a soft look. A colored jar can match the brand. A Frosted moisturizer jar can use a matte label. An Acrylic cream jar can use a clear label. A Double wall cosmetic jar can use an inner decoration. A Moisturizing cream jar can use a metallic logo.
The injection molding process for a Hydrating face cream jar should control the melt temperature and cooling rate. A high melt temperature can improve flow but can also increase stress. A low mold temperature can reduce cycle time but can cause warpage. We use a balanced cooling design and a moderate packing pressure. We inspect the inner wall for smoothness. A rough inner wall can increase product adherence. A smooth inner wall can improve evacuation.
For pump integration, the neck finish must be precise. The pump collar must seal against the jar. A leak test is needed. The dip tube length must match the jar height. A tube that is too long can bend. A tube that is too short can leave product. We test the pump with the actual formula. A Moisturizing cream jar may not need a pump. A Double wall cosmetic jar may need a different pump. A Frosted moisturizer jar may need a different cap. An Acrylic cream jar may need a different liner.
Q1 Can a Hydrating face cream jar hold a thick cream
It can, but a Moisturizing cream jar is often better for thick creams. The Hydrating face cream jar is designed for lower viscosity. The internal shape may not allow easy removal of thick product.
Q2 How do I reduce residual product in a Hydrating face cream jar
Use a tapered wall, a rounded bottom, and a wide mouth. A pump with a bottom-reaching tube can also help. A Frosted moisturizer jar can be designed with the same geometry.
Q3 Is a Double wall cosmetic jar suitable for a Hydrating face cream jar product
Yes, a Double wall cosmetic jar can hold a hydrating cream. It can provide thermal insulation. The inner sleeve should be compatible with the formula.
Q4 What liner is best for a Hydrating face cream jar
A foam liner with a polyethylene film or a foil liner is common. The choice depends on the formula and shelf life. An Acrylic cream jar may use a similar liner.
Q5 Can an Acrylic cream jar be used as a Hydrating face cream jar
Yes. An Acrylic cream jar can be used if the formula is compatible. It offers high clarity. A liner may be needed for water retention.
Q6 How do I test a Hydrating face cream jar for leakage
Fill the jar, cap it, and place it under vacuum. Then invert it and inspect for leaks. A drop test can also be done. A Moisturizing cream jar should be tested in the same way.
Q7 What is the typical fill volume for a Hydrating face cream jar
Common sizes are 15 ml, 30 ml, 50 ml, and 100 ml. A 50 ml jar is common for face cream. A 100 ml jar is common for body cream.
Q8 Can a Frosted moisturizer jar be used for a hydrating gel
Yes. A Frosted moisturizer jar can hold a hydrating gel. The frosted surface can improve grip. The liner should be selected for water retention.
The Hydrating face cream jar is a package for water-rich formulas. Its design should reduce waste, protect moisture, and support easy use. By selecting the right material, liner, and geometry, brands can improve product performance. Guangzhou Ruijia Packaging Products Co.,Ltd produces Hydrating face cream jar, Moisturizing cream jar, Double wall cosmetic jar, Frosted moisturizer jar, and Acrylic cream jar systems. We provide samples and technical support for development projects.