A: If we have stock, MOQ 3000pcs. | B: If out of stock, MOQ is 10000pcs.
Views: 0 Author: Site Editor Publish Time: 2026-09-15 Origin: Site
The Frosted moisturizer jar has a matte, translucent surface. This finish can reduce glare, hide minor scratches, and improve grip. It is used for creams, gels, and lotions that need a soft visual appearance. At Guangzhou Ruijia Packaging Products Co.,Ltd, we produce Frosted moisturizer jar systems with controlled surface roughness, sealing, and decoration. This article covers surface metrology, optical properties, grip, and technical details. It also refers to the Moisturizing cream jar, Hydrating face cream jar, Double wall cosmetic jar, and Acrylic cream jar.
The frosted surface is made by abrasive blasting or chemical etching. Abrasive blasting uses aluminum oxide or glass beads. The grit size and pressure control the roughness. A typical process uses F220 grit at 4.5 bar. The blasting time is 6 to 8 seconds for a 50 mm jar. The result is a surface roughness Ra of 1.8 to 2.2 µm. Chemical etching uses an acid bath. It can produce a more uniform finish. It is often used for thin walls.
A Moisturizing cream jar can be frosted for a matte look. A Hydrating face cream jar can be frosted to reduce glare. A Double wall cosmetic jar can have a frosted outer shell. An Acrylic cream jar can be frosted on the outside.
The frosted surface scatters light. This is measured by haze and transmittance. A standard Frosted moisturizer jar has a haze of about 72% and a light transmittance of about 40%. This allows the user to see the product level but not fine details. A satin finish can have a haze of 55% and transmittance of 55%. The choice depends on the desired look.
Parameter | Standard Frosted | Satin Finish |
|---|---|---|
Surface roughness Ra | 1.8–2.2 µm | 1.0–1.2 µm |
Haze | 72% | 55% |
Light transmittance | 40% | 55% |
Gloss at 60° | 8–12 GU | 15–20 GU |
Water contact angle | 108° | 110° |
Abrasion resistance | 500 cycles | 800 cycles |
The frosted surface has a higher coefficient of friction than a glossy surface. This can reduce the torque needed to open the jar. In a study, a Frosted moisturizer jar required about 12.4 N·m to open, while a glossy jar required about 15.8 N·m. This difference can help users with limited hand strength. The perceived weight of a frosted jar is also often higher. This can affect brand perception.
A Moisturizing cream jar with a frosted finish can be easier to open. A Hydrating face cream jar with a frosted finish can be easier to grip. A Double wall cosmetic jar with a frosted outer shell can have a similar effect. An Acrylic cream jar with a frosted finish can provide a soft touch.
The frosted surface has a higher surface area. This can increase water absorption. We apply a sealing treatment to reduce this. A silicone-based coating can reduce water absorption from 3.2% to 0.4%. It also lowers surface energy. This helps resist oils and pigments. The sealing treatment should be tested with the formula.
A Moisturizing cream jar with a frosted finish should be tested for oil resistance. A Hydrating face cream jar with a frosted finish should be tested for water loss. A Double wall cosmetic jar with a frosted outer shell may not need internal sealing. An Acrylic cream jar with a frosted finish may need a hard coat for scratch resistance.
Printing on a frosted surface can be difficult. Ink can spread. We use a fast-drying solvent ink. We also use a gloss varnish in selected areas to create a contrast. This can highlight a logo. A Frosted moisturizer jar can use a matte label. A Moisturizing cream jar can use a metallic hot stamp. A Hydrating face cream jar can use a clear label. A Double wall cosmetic jar can use an inner decoration. An Acrylic cream jar can use a printed insert.
The blasting process should be controlled for grit size, pressure, and time. A change in any parameter can change the roughness. The jar should be cleaned after blasting to remove particles. The sealing treatment should be cured at the right temperature. The ink should be tested for adhesion. The cap should match the finish. A glossy cap on a frosted jar can create a contrast. A frosted cap can create a uniform look.
We inspect the surface with a profilometer and a gloss meter. We also test the grip with a torque tester. A Frosted moisturizer jar should be easy to open and close. A Moisturizing cream jar should have a secure seal. A Hydrating face cream jar should have a compatible liner. A Double wall cosmetic jar should have a strong weld. An Acrylic cream jar should have good clarity.
Q1 Is a Frosted moisturizer jar more scratch resistant than a glossy jar
A frosted surface hides light scratches better than a glossy surface. Deep scratches may still show. A hard coat can improve resistance.
Q2 Can a Frosted moisturizer jar be used for a Moisturizing cream jar
Yes. A Frosted moisturizer jar can hold a rich cream. The sealing treatment should be checked for oil compatibility.
Q3 Does a Frosted moisturizer jar reduce light exposure
It scatters light but does not block it completely. For light-sensitive formulas, an opaque jar may be needed.
Q4 Can a Hydrating face cream jar be frosted
Yes. A Hydrating face cream jar can be frosted. The liner should be selected for water retention.
Q5 How do I clean a Frosted moisturizer jar
Use a mild detergent and a soft cloth. Avoid abrasive cleaners. The sealing treatment helps resist staining.
Q6 Can a Double wall cosmetic jar have a frosted outer shell
Yes. The outer shell can be frosted. The inner sleeve can be clear or colored.
Q7 What is the typical haze of a Frosted moisturizer jar
A standard frosted jar has a haze of about 72%. A satin finish has a haze of about 55%.
Q8 Can an Acrylic cream jar be frosted
Yes. An Acrylic cream jar can be frosted. The acrylic offers high clarity before frosting.
The Frosted moisturizer jar provides a matte look and improved grip. Its performance depends on surface roughness, sealing, and decoration. By testing these properties, brands can select a jar that meets user needs. Guangzhou Ruijia Packaging Products Co.,Ltd produces Frosted moisturizer jar, Moisturizing cream jar, Hydrating face cream jar, Double wall cosmetic jar, and Acrylic cream jar systems. We provide samples and technical data.